Step 2d1b-IOGear GSR-202, 202V, and 203 readers You can now Quit System Profiler and continue to Step 3. If you are already at 5.18 or 5.25, your reader is installed on your system, and no further hardware changes are required. Look for “ SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.18, you need to update your firmware to 5.25. If your reader does not look this this, go to the next step.īelow ' Hardware' click ' USB.' On the right side of the screen under ' USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. If you have a reader other than these 4, GO TO STEP 3 Step 2d1: Verify firmware version on your SCR-331 or GSR-202, 202V, or 203 CAC reader. Different readers will show differently, most readers have no problem in this step.
Step 2d: Make sure the CAC reader shows in Hardware, USB, under USB Device Tree ( See image below). Step 2c: Click ' System Report.' (button) (Only available in 10.7.x and above 10.6.x and earlier will not see this window)
Step 2a: Click the Apple Icon in the upper left corner of the desktop, select ' About This Mac' Plug the CAC reader into an available USB port before proceeding, give it a few moments to install Step 2: The Mac must be able to 'see' the reader Information about these readers are in Step 2 NOTE: Readers such as: SCR-331, GSR-202, GSR-202V, & GSR-203 could need firmware updates (NO OTHER Readers need firmware updates). 'Some, not all' CAC readers may need to have a small program installed to make it work. Visit the USB Readers page to verify the CAC reader you have is Mac friendly Step 1: Your CAC reader must be Mac friendly Common Access Card (CAC) or Smart Card readers are used as a communications medium between the Smart Card and a host (e.g. The IOGEAR GSR202 is a TAA compliant USB Common Access Card Reader for military, government and even private sector workers who need everyday access to secure systems. Does not read your CAC when using your Mac. Plug your IOGEAR CAC reader into an available USB port. Windows 7 & 8/8.1: Right click Computer, select. If your smart card reader is listed, go to the next step of installing the DoD certificates. 6 'high level' steps needed, follow down the page to make this a painless systematic process
0 kommentar(er)
